Ultrasonic Cleaning Machine Maintenance Tips

1, not long time uninterrupted use, standard machine with 20 minutes, industrial machine with one or two hours, shut down and rest for more than 30 minutes;

Although ultrasonic cleaning machine is a machine, but also "fatigue", especially the standard machine, more need to rest. The principle of ultrasonic cleaning is to rely on the high-frequency vibration produced by ultrasonic vibrator to form ultrasonic wave to remove dirt. If the vibration goes down for a long time, no matter how good the vibrator will stand it.

2. If you do not use it for a long time, the liquid in the cleaning tank should be removed and cleaned. If it is a chemical cleaning agent, it is best to clean it with clean water and finally dry it.

Only keep clean, will not be corroded rust, once rust, there will be the possibility of rust wear.

3. Do not place it in the corner or in an unventilated place.

Ultrasonic cleaning machine will produce heat when working, need to release, no ventilation is easy to heat poor, lead to burn out.

4. Avoid dry burning by all means

Some customers because of cleaner is more expensive, reluctant to put too much water, or because the workpiece is small, do not need too much water, just put a little water in the tank, and then open the heating function, and it will be like adding fuel to the fire, not burning through the bottom of the channel does not stop, burning through the change new, which cost more, to measure yourself.

5. Handle it gently

Do not think that ultrasonic cleaning machine is an iron guy, you can arbitrarily throw it, you know, there are also circuit boards with precision components, there are ultrasonic vibrators, be careful care oh.